HotSpring Spa Covers - OEM Replacement Covers

When you order a Hot Spring cover from Pools Plus you are receiving a factory original replacement! All covers from the manufacture are UL (underwriters laboratory) listed and ASTM rated. Larger model covers use two (2) pound density foam and a heat-sealed waterproof plastic sheeting to keep moisture at bay. If you have a cover removal devise (cover lift, cover cradle, uprite, glide rite) made by Hot Spring, you will need this cover!

These devises are attached to the cover through the side into a plate built into the spa. No other manufactured spa cover can do that. Please keep this in mind when orderinig your replacement cover.

If you do not see your cover listed here, please check one of the other products below.

Please note: Sizes and Dimensions of the HotSpring covers vary from year to year, and model to model. Make sure the information you have is correct. Once the cover is ordered, it is near impossible to cancel. Contact us with any questions you may have prior to ordering.

Shipping of covers will take approximately 2-3 weeks from the factory.
Hot Spring Spa Parts Factory Original Spa Cover

What is the Serial Number to your Spa?

HotSpring Spa Covers - OEM Replacement Covers

When you order a Hot Spring cover from Pools Plus you are receiving a factory original replacement! All covers from the manufacture are UL (underwriters laboratory) listed and ASTM rated. Larger model covers use two (2) pound density foam and a heat-sealed waterproof plastic sheeting to keep moisture at bay. If you have a cover removal devise (cover lift, cover cradle, uprite, glide rite) made by Hot Spring, you will need this cover!

These devises are attached to the cover through the side into a plate built into the spa. No other manufactured spa cover can do that. Please keep this in mind when orderinig your replacement cover.

Please note: Sizes and Dimensions of the HotSpring covers vary from year to year, and model to model. Make sure the information you have is correct. Once the cover is ordered, it is near impossible to cancel. Contact us with any questions you may have prior to ordering.

Shipping of covers will take approximately 2-3 weeks from the factory.
Hot Spring Spa Parts Factory Original Spa Cover

What is the Serial Number to your Spa?

CoverCradle® Retractable Cover System uses dual pneumatic gas springs in the arms of this lifter make cover removal a breeze. The top-of-the-line CoverCradle system features a low-profile design and ultra-smooth gliding mechanism.

This removal devise is meant to fit most Hot Spring, Tiger River, and Hot Spot spas after 1996. Later in the order process we will ask you which spa you have and which year it is. You may also enter your spas serial number. This is neccessary so we can match up your Cover Cradle to your spa.

PREREQUISITE FOR THIS DEVISE
24" of clearance in the back of the spa.
6" of clearnace on each side of the spa.
A Factory original Hot Spring/Tiger River cover!!

UpRite® Retractable Cover System lifts the cover up over the spa bar top. It is ideal for limited clearance applications such as decks and gazebos. So feel free to square your spa up to your home or your gazebo.

This removal devise is meant to fit most Hot Spring, Tiger River, and Hot Spot spas after 1996. Sorry, but will not work with Hot Spring Classic Spas. Later in the order process we will ask you which spa you have and which year it is. You may also enter your spas serial number. This is neccessary so we can match up your Cover Cradle to your spa.

PREREQUISITE FOR THIS DEVISE
8" of clearance in the back of the spa.
6" of clearnace on the side of the spa.
A Factory original Hot Spring/Tiger River cover

POOLS PLUS does not recommend this devise if you live in an area with windy conditions.

Lift n Glide
It's easy to remove your cover with this economical cover lifter. Requires 14" clearance.

The Covermate 1 Removal Devise is an attractive, sleek, low profile devise with an ergonomic look compliments any spa. It is easy to Use even in the smallest of spa users can operate with ease. Covermate 1 is space efficient, as you only need as little as 10" clearance behind the spa. It has a simple design, proven to be absolutely trouble-free, with only one moving part and a built-in stop mechanism. For those who have a spa larger than 7-1/2feet then you should consider the Covermate X (see below).

Sorry, If you have a non-square spa like a Classic or a Highlife spa then this devise will not fit your spa.

Covermate Removal Devise with Extended Arm - for Large Spas - The same as the unit above, but intended for those large spas that need a removal devise. Perfect for those who have Hot Spring Grandees & Vistas or Tiger River Caspians & Siberians. If you are not sure, send us an email with your spa's dimensions and we can help you get the right one.

This devise will not work if you have a non-square spa, like a Classic or Highlife.

The Covermate Freestyle when open positions the cover away from the spa, allowing full use and additional privacy. Covermate Freestyle works with any make, model, or brand spa or hot tub. Adjustable mounting base system enables CoverMate freestyle to be installed on virtually any spa. Required is 14" of clearance. The adjustable mounting base system simply slides under the spa. The spa's weight provides a massive amount of strength to the bracket system. It has a simple design, proven to be absolutely trouble-free, with minimal moving parts.

Coverlock Replacement Kit (set of 4) contains both male and female cover lock componants as well as screws. Used on Hot Spring, Tiger River, Hot Spot, and Solana spas, 1998 to current models. However will work with any spa strap that is 1" in width or less.

Part Number: 71515

Solar Blankets positioned on the waterline in spas can help to reduce chemical abuse on the spa cover (making it last longer) and retain more heat & reduce evaporation. This solar blanket, in conjunction with your spa cover, can help save money in operating your spa, as well as, increase the life of your spa cover.<br><br>

Please make sure to remove the solar blanket whenever you add shock or sanitizers for 30 minutes minimum. This allows the chemicals to do their job and remove contaminents. Not removing the cover causes premature water logging.

Squeeze-N-Clean Spa Cover Cleaner - Spa covers cost a lot of money. Special cleaners created for spa covers can be found in our Squeeze-N-Clean Spa Cover Cleaner. Contains no petroleum (unlike Armor All and others) which can degrade your cover. Pictured on the left.

Vinyl Conditioning Cream - Once you have cleaned your spa cover with our Squeeze-N-Clean, keep your spa cover vinyl in pristeen condition with our Vinyl Conditioning Cream. Vinyl Conditioning Cream keeps your spa cover vinyl looking and feeling new. In the picture - the one on the right.